 |
| SUBSTRATE:- Fibre Reinforced Cement Boards (see Fibre Cement) | ||||||||||||||||||||
|
Description:- Building board manufactured from fibrous material (generally cellulose), cement and water. Can be cast into sheets with smooth surface or onto moulds to give surface patterns. |
||||||||||||||||||||
|
Area of Use:- Wall linings, eaves linings, soffits. |
||||||||||||||||||||
|
Substrate Preparation:- Fill any imperfections with an appropriate patching material. On previously painted surfaces remove loose and flaking paint and fill surface imperfections. Clean down thoroughly to remove dirt, grease, dust etc. Kill any mould or fungus with SOLVER Line 4651 Sterilizing Wall-Wash. Seal stains with SOLVER Line 4747 Quick Drying Multi Block Stain Sealer. Spot prime bare areas with the recommended first coat. Powdery, friable surfaces must be washed and rubbed down to a sound surface. On areas where it is not possible to completely remove powdery materials apply SOLVER Line 4104 Surface Conditioner according to directions. |
||||||||||||||||||||
Water Based Recommendation:-
|
||||||||||||||||||||
|
Solvent Based Recommendation:-
|
Use any SOLVER Duraguard gloss level. If substrate is Blue Board, use complete SOLVER Solvatex system for texture finish
Patching compounds (all fillers) must be mixed as per recommendations for exterior use,
i.e. with 10% cement powder added prior to use.