 |
| SUBSTRATE:- Fibre Glass - Architectural | ||||||||||||||||||||
|
Description:- Two pack glass reinforced polyester resin formed into a mould while liquid and on completion of the reaction, sets very hard and smooth. Due to very smooth nature of surface and release agents, extremely thorough preparation required. Often Solprep, sand well and Solprep works well but success is dependent totally on level of preparation prior to first coat. |
||||||||||||||||||||
|
Area of Use:- Architectural decorative castings, small trailer boats above water line. For all other situations, refer to Technical Service. |
||||||||||||||||||||
|
Substrate Preparation:- Thoroughly wash with SOLVER Line 4510 Solprep Degreaser, sand well to flatten off ALL gloss. Repeat and apply undercoat. |
||||||||||||||||||||
|
Water Based Recommendation:- Nil recommended
|
||||||||||||||||||||
|
Solvent Based Recommendation:-
|
NOTE: Not suitable for moored boats, i.e. long term immersion.
Trailer boats can be coated using SOLVER Line 4156 Brite-Glo Enamel with SOLVER
Line 4298 Dry Add mixed at the recommended proportions if a more durable coating is required.
For a sprayed finish, SOLVER Line 4629 Fast Dry Metal Primer and SOLVER
Line 4777 Supergloss and SOLVER Line 4298 Dry Add can be used as an alternative.