Painting Tips

SUBSTRATE:- Copper

Description:- Non ferrous metal.

Area of Use:- Used for water pipes and decorative features such as range hoods etc.

Substrate Preparation:- Degrease with Solver Line 4510 Solprep Degreaser, and roughen surface with abrasive paper, then dust off. Avoid the use of steel wool, use plastic scourers or wet & dry abrasive paper in preference.

Water Based Recommendation:-

	1st Coat	2nd Coat	Finish Coat
	SOLVER Line 4106 Galva-Link	SOLVER Duraguard Range	SOLVER Duraguard Range
Product Info. Sheet	PR-4106-01	FC-4290-01 FC-4520-01 FC-4750-01	FC-4290-01 FC-4520-01 FC-4750-01
A.P.A.S. Specification	APAS 0134	Refer to Product Information Sheets	Refer to Product Information Sheets
Recoat	4 hrs	2 hrs

Solvent Based Recommendation:-

	1st Coat	2nd Coat	Finish Coat
	SOLVER Line 4632 Single Pack Etch Primer	SOLVER Line 4103 All Purpose Undercoat	SOLVER Line 4171 Int/Ext High Gloss Enamel
Product Info. Sheet	PR-4632-01	SU-4103-01	FC-4171-01
A.P.A.S. Specification	APAS 0035/2 (grey only)	APAS 0016/1	APAS 0015/1 APAS 0015/2
Recoat	2 hrs	24 hours	24 hrs

2 coats

If clear finish required special Acrylic lacquer available from Wattyl - INCRALAC