| SUBSTRATE:- Concrete Walls (Not Tilt Up) | ||||||||||||||||||||
|
Description:- Hard brittle masonry material constructed from coarse aggregate (gravel), fine aggregate (sand), cement and water which when mixed in the required proportions and placed and finished with a variety of trowels etc. eventually dries to a hard surface. |
||||||||||||||||||||
|
Area of Use:- Walls. |
||||||||||||||||||||
| Substrate Preparation:- Allow new unpainted surfaces to cure and dry for at least 12 weeks. Fill any imperfections with an appropriate patching material. Kill any mould or fungus with SOLVER Line 4651 Sterilizing Wall-Wash. Treat any efflorescence with 15% calcium chloride solution. Surface should be acid etched strictly in accordance with SS-110. Note:- Some dense concrete requires multiple etching to provide a suitable surface to paint. | ||||||||||||||||||||
|
Water Based Recommendation:-
|
||||||||||||||||||||
|
Solvent Based Recommendation:-
|
Performance is enhanced with use of any water based undercoat/sealer.
Two coats
If a clear finish is required, use SOLVER Line 4652 Silicone Water Repellent.
SOLVER Texture Coatings can be used as an alternative.