Description:- Hard brittle masonry material constructed from coarse aggregate (gravel), fine aggregate (sand), cement and water which when mixed in the required proportions and placed and finished with a variety of trowels etc. eventually dries to a hard surface.

Substrate Preparation:- Concrete must be acid etched and rinsed thoroughly with clean water. (Refer SS-110 Etching of Concrete).

Concrete surface must be clean and dry. Best results are obtained by pressure washing. Allow surface to dry thoroughly before proceeding. SOLVER Line 4550 Step-Safer may be applied directly to properly prepared concrete surfaces but if a sealer is required apply a coat of SOLVER Line 4455 Solvatex Acrylic Sealer.

Water Based Recommendation:-

Solvent Based Recommendation:-