SUBSTRATE:- Composite Boards

Description:- Timber composite material often manufactured using compressed face timber and a backing of MDF.

Area of Use:- General building construction, frames, joinery, wall cladding.

INTERIOR ONLY.

Substrate Preparation:- All surfaces must be clean, sound, dust-free and dry or lightly damp. Kill any mould or fungus with SOLVER Line 4651 Sterilizing Wall Wash. Renew unpainted surfaces affected by weathering by sanding or planing. Use galvanized nails. If ungalvanized nails have been used coat nail heads with SOLVER Line 4120 Zinc Phosphate Anti-Corrosive Metal Primer to prevent rusting. Fill holes and cracks with a suitable exterior filler. On previously painted surfaces, remove loose and flaking paint and wash down chalking surfaces. On areas where it is not possible to completely remove these materials apply SOLVER Line 4104 Surface Conditioner and leave to dry for 48 hours. All Gloss surfaces should be dulled completely by sanding, then wiped clean with a damp cloth. Spot prime bare areas with the finishing coat. When painting White or light colours over tannin-rich timbers which can cause discolouration, an additional coat may be required, and extended dry time should be allowed. Refer product directions.

Water Based Recommendation:-

Solvent Based Recommendation:-