 |
|
SUBSTRATE:- Clear Finished Surfaces (see Shellac) |
||||||||||||||||||||
|
Description:- As clear finishes are relatively hard, they require very thorough sanding to flatten off ALL gloss prior to finishing. Some examples require special attention to remove silicone based polishes used during life of coating. |
||||||||||||||||||||
|
Area of Use:- Interior Joinery. For previously coated factory applied clear coatings, refer to Technical Service. |
||||||||||||||||||||
| Substrate Preparation:- Sand the surface thoroughly in the direction of the grain to completely flatten off all gloss. Remove all dust and other contaminants. Previous lacquer coatings require complete removal. | ||||||||||||||||||||
|
Water Based Recommendation:-
|
||||||||||||||||||||
|
Solvent Based Recommendation:-
|
ޠ Can substitute for SOLVER Line 4850 Polyaqua Gloss Clear
Can substitute for SOLVER Line 4834 Polysol Interior Gloss