| SUBSTRATE:- Brass | ||||||||||||||||||||
|
Description:- Glossy smooth gold coloured non-ferrous metal. |
||||||||||||||||||||
| Area of Use:- Used as decorative feature or where non corrosive fittings are required. | ||||||||||||||||||||
|
Substrate Preparation:- Degrease new surfaces with SOLVER Line 4510 Solprep Degreaser using frequent changes of cloth. Ensure surfaces are clean and dry, and free from salt, dirt dust etc. If the surface is weathered scuff with fine abrasive paper or scouring pad to remove corrosion products (not Zinc Anneal). For previously painted surfaces remove old flaking paint and clean down thoroughly to remove any dust or powdery paint. Spot prime bare areas with the recommended first coat. |
||||||||||||||||||||
|
Water Based Recommendation:-
|
||||||||||||||||||||
|
Solvent Based Recommendation:-
|
Two coats recommended in coastal environments
If clear finish required special Acrylic lacquer available from Wattyl - INCRALAC