Painting Tips

SUBSTRATE:- Anodised Aluminium

Description:- Aluminium surface treated by electrolysis.

Area of Use:- Window frames and sliding door frames.

Substrate Preparation:- Degrease with Solver Line 4510 Solprep Degreaser, and significantly roughen surface with 320 grit wet & dry abrasive paper, then dust off. Do not use steel wool as fibres embed in surface and will lead to aluminium corroding to protect steel.

Water Based Recommendation:-

	1st Coat	2nd Coat	Finish Coat
	SOLVER Line 4106 Galva-Link	SOLVER Duraguard Range	SOLVER Duraguard Range
Product Info. Sheet	PR-4106-01	FC-4290-01 FC-4520-01 FC-4750-01	FC-4290-01 FC-4520-01 FC-4750-01
A.P.A.S. Specification	APAS 0134	Refer to Product Information Sheets	Refer to Product Information Sheets
Recoat	4 hrs	2 hrs

Solvent Based Recommendation:-

	1st Coat	2nd Coat	Finish Coat
	SOLVER Line 4120 Zinc Phosphate Anti-Corrosive Metal Primer White Only	SOLVER Line 4120 Zinc Phosphate Anti-Corrosive Metal Primer White Only	SOLVER Enamel Range (Two Coats)
Product Info. Sheet	PR-4120-01	PR-4120-01	FC-4198-01 (interior only) FC-4171-01 (int/ext)
A.P.A.S. Specification	APAS 0032 and 0162/1	APAS 0032 and 0162/1	Refer to Product Information Sheets
Recoat	24 hrs	24 hrs	24 hrs

Note that SOLVER Line 4120 Zinc Phosphate Anti-Corrosive Metal Primer WHITE is also suitable as the 1^st coat under water based top coats

Finish Coat