SOLVER 4159 BRITE GLO ENAMEL MID CHROME LEAD FREE
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 5-Aug-2005
NC317TCP
CHEMWATCH 59309
Version No:2.0
SOLVER 4159 BRITE GLO ENAMEL MID CHROME LEAD FREE
"Sign signwriters enamel misspellings as bright glo brightglo bright glow"
PAINT
Viscous enamel used for sign writing. Usually applied by brush. The use of a quantity of
material in an unventilated or confined space may result in increased exposure and an
irritating atmosphere developing. Before starting consider control of exposure by
mechanical ventilation.
Company: Solver Paints Pty Ltd Company: Solver Paints Pty Ltd
Address: Address:
211 Collier Rd 560 Churchill Road
Bayswater Kilburn
WA, 6053 SA, 5084
AUS AUS
Telephone: +61 8 9449 8811 Telephone: +61 8 8368 1200
Fax: +61 8 9371 5872 Emergency Tel: 1800 039 008 (24 hours)
Emergency Tel: +61 3 9573 3112
Fax: +61 8 8368 1222
| Flammability | 2 | |
| Toxicity | 2 | |
| Body Contact | 2 | |
| Reactivity | 1 | |
| Chronic | 2 | |
| SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 | ||
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC,
and the ADG Code.
S5
| RISK | SAFETY |
| Flammable. | Keep away from sources of ignition. No smoking. |
| Irritating to skin. | Keep container in a well ventilated place. |
| Harmful: danger of serious damage to health by prolonged exposure through inhalation. | Avoid exposure - obtain special instructions before use. |
| Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. | Do not empty into drains. |
| Possible risk of harm to the unborn child. | To clean the floor and all objects contaminated by this material, use water and detergent. |
| HARMFUL-May cause lung damage if swallowed. | Keep container tightly closed. |
| Inhalation, skin contact and/or ingestion may produce health damage*. | Keep away from food, drink and animal feeding stuffs. |
| Cumulative effects may result following exposure*. | Take off immediately all contaminated clothing. |
| May produce discomfort of the eyes and respiratory tract*. | In case of contact with eyes, rinse with plenty of water and contact Doctor or Poisons Information Centre. |
| Limited evidence of a carcinogenic effect*. | If swallowed, IMMEDIATELY contact Doctor or Poisons Information Centre. (show this container or label). |
| Vapours potentially cause drowsiness and dizziness*. | This material and its container must be disposed of as hazardous waste. |
| * (limited evidence). |
| NAME | CAS RN | % |
| alkyd resin solution | Various | >60 |
| organic lead free yellow pigments unregulated | 1-10 | |
| titanium dioxide | 13463-67-7 | 1-10 |
| mineral turpentine | Not avail. | 1-10 |
| white spirit | 8052-41-3. | 10-30 |
| additives non regulated including | <2.0 | |
| anti skinning agent dispersant driers | ||
| NOTE: Manufacturer has supplied full ingredient | ||
| information to allow CHEMWATCH assessment. |
For advice, contact a Poisons Information Centre or a doctor.
· If swallowed do NOT induce vomiting.
· If vomiting occurs, lean patient forward or place on left side (head-down position, if
possible) to maintain open airway and prevent aspiration.
· Observe the patient carefully.
· Never give liquid to a person showing signs of being sleepy or with reduced awareness;
i.e. becoming unconscious
· Give water to rinse out mouth, then provide liquid slowly and as much as casualty can
comfortably drink.
· Seek medical advice.
If this product comes in contact with the eyes:
· Immediately hold eyelids apart and flush the eye continuously with running water.
· Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and
moving the eyelids by occasionally lifting the upper and lower lids.
· Continue flushing until advised to stop by the Poisons Information Centre or a doctor,
or for at least 15 minutes.
· Transport to hospital or doctor without delay.
· Removal of contact lenses after an eye injury should only be undertaken by skilled
personnel.
If solids or aerosol mists are deposited upon the skin:
· Flush skin and hair with running water (and soap if available).
· Remove any adhering solids with industrial skin cleansing cream.
· DO NOT use solvents.
· Seek medical attention in the event of irritation.
· If fumes or combustion products are inhaled remove from contaminated area.
· Lay patient down. Keep warm and rested.
· Prostheses such as false teeth, which may block airway, should be removed, where
possible, prior to initiating first aid procedures.
· Apply artificial respiration if not breathing, preferably with a demand valve
resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary.
· Transport to hospital, or doctor.
For acute or short term repeated exposures to petroleum distillates or related hydrocarbons: · Primary threat to life, from pure petroleum distillate ingestion and/or inhalation, is respiratory failure. · Patients should be quickly evaluated for signs of respiratory distress (e.g. cyanosis, tachypnoea, intercostal retraction, obtundation) and given oxygen. Patients with inadequate tidal volumes or poor arterial blood gases (pO2 50 mm Hg) should be intubated. · Arrhythmias complicate some hydrocarbon ingestion and/or inhalation and electrocardiographic evidence of myocardial injury has been reported; intravenous lines and cardiac monitors should be established in obviously symptomatic patients. The lungs excrete inhaled solvents, so that hyperventilation improves clearance. · A chest x-ray should be taken immediately after stabilisation of breathing and circulation to document aspiration and detect the presence of pneumothorax. · Epinephrine (adrenalin) is not recommended for treatment of bronchospasm because of potential myocardial sensitisation to catecholamines. Inhaled cardioselective bronchodilators (e.g. Alupent, Salbutamol) are the preferred agents, with aminophylline a second choice. · Lavage is indicated in patients who require decontamination; ensure use of cuffed endotracheal tube in adult patients. [Ellenhorn and Barceloux: Medical Toxicology].
· Foam.
· Dry chemical powder.
· BCF (where regulations permit).
· Carbon dioxide.
· Water spray or fog - Large fires only.
· Alert Fire Brigade and tell them location and nature of hazard.
· May be violently or explosively reactive.
· Wear breathing apparatus plus protective gloves.
· Prevent, by any means available, spillage from entering drains or water course.
· If safe, switch off electrical equipment until vapour fire hazard removed.
· Use water delivered as a fine spray to control fire and cool adjacent area.
· Avoid spraying water onto liquid pools.
· DO NOT approach containers suspected to be hot.
· Cool fire exposed containers with water spray from a protected location.
· If safe to do so, remove containers from path of fire.
· Liquid and vapour are flammable.
· Moderate fire hazard when exposed to heat or flame.
· Vapour forms an explosive mixture with air.
· Moderate explosion hazard when exposed to heat or flame.
· Vapour may travel a considerable distance to source of ignition.
· Heating may cause expansion or decomposition leading to violent rupture of containers.
· On combustion, may emit toxic fumes of carbon monoxide (CO).
Other combustion products include: carbon dioxide (CO2).
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine
bleaches, pool chlorine etc. as ignition may result.
Breathing apparatus.
Chemical splash suit.
· Remove all ignition sources. · Clean up all spills immediately. · Avoid breathing vapours and contact with skin and eyes. · Control personal contact by using protective equipment. · Contain and absorb small quantities with vermiculite or other absorbent material. · Wipe up. · Collect residues in a flammable waste container.
· Clear area of personnel and move upwind. · Alert Fire Brigade and tell them location and nature of hazard. · May be violently or explosively reactive. · Wear breathing apparatus plus protective gloves. · Prevent, by any means available, spillage from entering drains or water course. · Consider evacuation (or protect in place). · No smoking, naked lights or ignition sources. · Increase ventilation. · Stop leak if safe to do so. · Water spray or fog may be used to disperse vapour. · Contain spill with sand, earth or vermiculite. · Use only spark-free shovels and explosion proof equipment. · Collect recoverable product into labelled containers for recycling. · Collect solid residues and seal in labelled drums for disposal. · Wash area and prevent runoff into drains. · After clean up operations, decontaminate and launder all protective clothing and equipment before storing and re-using. · If contamination of drains or waterways occurs, advise emergency services.
From IERG (Canada/Australia) Isolation Distance 25 metres Downwind Protection Distance 300 metres IERG Number 14
FOOTNOTES
1 PROTECTIVE ACTION ZONE is defined as the area in which people are at risk of harmful exposure. This zone
assumes that random changes in wind direction confines the vapour plume to an area within 30 degrees on
either side of the predominant wind direction, resulting in a crosswind protective action distance equal
to the downwind protective action distance.
2 PROTECTIVE ACTIONS should be initiated to the extent possible, beginning with those closest to the spill
and working away from the site in the downwind direction. Within the protective action zone a level of
vapour concentration may exist resulting in nearly all unprotected persons becoming incapacitated and
unable to take protective action and/or incurring serious or irreversible health effects.
3 INITIAL ISOLATION ZONE is determined as an area, including upwind of the incident, within which a high
probability of localised wind reversal may expose nearly all persons without appropriate protection to
life-threatening concentrations of the material.
4 SMALL SPILLS involve a leaking package of 200 litres (55 US gallons) or less, such as a drum (jerrican or
box with inner containers). Larger packages leaking less than 200 litres and compressed gas leaking from
a small cylinder are also considered "small spills".
LARGE SPILLS involve many small leaking packages or a leaking package of greater than 200 litres, such as
a cargo tank, portable tank or a "one-tonne" compressed gas cylinder.
5 Guide 128 is taken from the US DOT emergency response guide book.
6 IERG information is derived from CANUTEC - Transport Canada.
The maximum airborne concentration below which it is believed that nearly all individuals could be exposed
for up to one hour WITHOUT experiencing or developing
life-threatening health effects is:
titanium dioxide 500 mg/m³
white spirit 500 mg/m³
irreversible or other serious effects or symptoms which could impair an individual's ability to take
protective action is:
titanium dioxide 15 mg/m³
white spirit 500 mg/m³
other than mild, transient adverse effects without perceiving a clearly defined odour is:
titanium dioxide 15 mg/m³
white spirit 30 mg/m³
The threshold concentration below which most people will experience no appreciable risk of health effects:
titanium dioxide 15 mg/m³
white spirit 10 mg/m³
American Industrial Hygiene Association (AIHA)
Ingredients considered according to the following cutoffs
Very Toxic (T+) >= 0.1% Toxic (T) >= 3.0%
R50 >= 0.25% Corrosive (C) >= 5.0%
R51 >= 2.5%
else >= 10%
where percentage is percentage of ingredient found in the mixture
___________________________________________
| + | X | X | X | X | + |
___________________________________________
+: May be stored together
O: May be stored together with specific preventions
X: Must not be stored together
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Avoid generating and breathing mist.
· Avoid all personal contact, including inhalation.
· Wear protective clothing when risk of overexposure occurs.
· Use in a well-ventilated area.
· Prevent concentration in hollows and sumps.
· DO NOT enter confined spaces until atmosphere has been checked.
· Avoid smoking, naked lights or ignition sources.
· Avoid generation of static electricity.
· DO NOT use plastic buckets.
· Earth all lines and equipment.
· Use spark-free tools when handling.
· Avoid contact with incompatible materials.
· When handling, DO NOT eat, drink or smoke.
· Keep containers securely sealed when not in use.
· Avoid physical damage to containers.
· Always wash hands with soap and water after handling.
· Work clothes should be laundered separately.
· Use good occupational work practice.
· Observe manufacturer's storing and handling recommendations.
· Atmosphere should be regularly checked against established exposure standards to ensure
safe working conditions.
· Metal can or drum
· Packaging as recommended by manufacturer.
· Check all containers are clearly labelled and free from leaks.
Avoid storage with oxidisers.
· Store in original containers in approved flame-proof area.
· No smoking, naked lights, heat or ignition sources.
· DO NOT store in pits, depressions, basements or areas where vapours may be trapped.
· Keep containers securely sealed.
· Store away from incompatible materials in a cool, dry well ventilated area.
· Protect containers against physical damage and check regularly for leaks.
· Observe manufacturer's storing and handling recommendations.
Source Material TWA TWA STEL STEL Peak Peak TWA
ppm mg/m³ ppm mg/m³ ppm mg/m³ F/CC
_________________ __________________ _____ _____ _____ _____ _____ _____ _____
Source Material TWA TWA STEL STEL Peak Peak TWA
ppm mg/m³ ppm mg/m³ ppm mg/m³ F/CC
_________________ __________________ _____ _____ _____ _____ _____ _____ _____
Australia Exposure titanium dioxide 10
Standards (Titanium dioxide
(a))
Australia Exposure white spirit 790
Standards (White spirits)
Australia Exposure white spirit (Oil 5
Standards mist, refined
mineral)
| Material | Revised IDLH Value (mg/m3) | Revised IDLH Value (ppm) |
| titanium dioxide | 5,000 | |
| white spirit | 20,000 |
OSF=0.042 (mineral turpentine) Exposed individuals are NOT reasonably expected to be warned, by smell, that the Exposure Standard is being exceeded. Odour Safety Factor (OSF) is determined to fall into either Class C, D or E. The Odour Safety Factor (OSF) is defined as: OSF= Exposure Standard (TWA) ppm/ Odour Threshold Value (OTV) ppm Classification into classes follows:
| Class | OSF | Description |
| A | 550 | Over 90% of exposed individuals are aware by smell that the Exposure Standard (TLV-TWA for example) is being reached, even when distracted by working activities |
| B | 26-550 | As "A" for 50-90% of persons being distracted |
| C | 1-26 | As "A" for less than 50% of persons being distracted |
| D | 0.18-1 | 10-50% of persons aware of being tested perceive by smell that the Exposure Standard is being reached |
| E | <0.18 | As "D" for less than 10% of persons aware of being tested |
None assigned. Refer to individual constituents.
ALKYD RESIN SOLUTION: No exposure limits set by NOHSC or ACGIH. TITANIUM DIOXIDE: It is the goal of the ACGIH (and other Agencies) to recommend TLVs (or their equivalent) for all substances for which there is evidence of health effects at airborne concentrations encountered in the workplace. At this time no TLV has been established, even though this material may produce adverse health effects (as evidenced in animal experiments or clinical experience). Airborne concentrations must be maintained as low as is practically possible and occupational exposure must be kept to a minimum. NOTE: The ACGIH occupational exposure standard for Particles Not Otherwise Specified (P.N.O.S) does NOT apply. Sensory irritants are chemicals that produce temporary and undesirable side-effects on the eyes, nose or throat. Historically occupational exposure standards for these irritants have been based on observation of workers' responses to various airborne concentrations. Present day expectations require that nearly every individual should be protected against even minor sensory irritation and exposure standards are established using uncertainty factors or safety factors of 5 to 10 or more. On occasion animal no -observable-effect-levels (NOEL) are used to determine these limits where human results are unavailable. An additional approach, typically used by the TLV committee (USA) in determining respiratory standards for this group of chemicals, has been to assign ceiling values (TLV C) to rapidly acting irritants and to assign short-term exposure limits (TLV STELs) when the weight of evidence from irritation, bioaccumulation and other endpoints combine to warrant such a limit. In contrast the MAK Commission (Germany) uses a five -category system based on intensive odour, local irritation, and elimination half-life. However this system is being replaced to be consistent with the European Union (EU) Scientific Committee for Occupational Exposure Limits (SCOEL); this is more closely allied to that of the USA. OSHA (USA) concluded that exposure to sensory irritants can: · cause inflammation · cause increased susceptibility to other irritants and infectious agents · lead to permanent injury or dysfunction · permit greater absorption of hazardous substances and · acclimate the worker to the irritant warning properties of these substances thus increasing the risk of overexposure. WARNING: This substance has been classified by the IARC as Group 2B: Possibly Carcinogenic to Humans. IDLH Level: 5000 mg/m3 Animal studies at 10 mg/m3 show no significant fibrosis, possibly reversible tissue reaction and the architecture of lung air spaces remains intact. MINERAL TURPENTINE: CEL TWA: 80 ppm, 480 mg/m3 [Shell] WHITE SPIRIT: Low and high odour thresholds of 5.25 and 157.5 mg/m3, respectively, were considered to provide a rather useful index of odour as a warning property. The TLV-TWA is calculated from data on the toxicities of the major ingredients and is intended to minimise the potential for irritative and narcotic effects, polyneuropathy and kidney damage produced by vapours. The NIOSH (USA) REL-TWA of 60 ppm is the same for all refined petroleum solvents. NIOSH published an occupational "action level" of 350 mg/m3 for exposure to Stoddard solvent, assuming a 10-hour work shift and a 40-hour work-week. The NIOSH-REL ceiling of 1800 mg/m3 was established to protect workers from short-term effects that might produce vertigo or other adverse effects which might increase the risk of occupational accidents. Combined (gross) percutaneous absorption and inhalation exposure (at concentrations associated with nausea) are thought, by some, to be responsible for the development of frank hepatic toxicity and jaundice.
· Safety glasses with side shields; or as required, · Chemical goggles. · Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lens or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at the first signs of eye redness or irritation - lens should be removed in a clean environment only after workers have washed hands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59].
· Barrier cream with polyethylene gloves or Wear chemical protective gloves, eg. PVC. Wear safety footwear. DO NOT use solvent to clean the skin.
· Overalls. · Eyewash unit.
Respiratory protection may be required when ANY "Worst Case" vapour-phase concentration is exceeded (see Computer Prediction in "Exposure Standards").
| Protection Factor | Half-Face Respirator | Full-Face Respirator | |
| 10 x ES | A-AUS | - | |
| A-PAPR-AUS | |||
| 50 x ES | Air-line* | - | |
| 100 x ES | - | A-3 | |
| 100+ x ES | - | Air-line** | |
Use in a well-ventilated area. None required when handling small quantities. OTHERWISE: General exhaust is adequate under normal operating conditions. If risk of overexposure exists, wear SAA approved respirator. Correct fit is essential to obtain adequate protection. Provide adequate ventilation in warehouse or closed storage areas. Air contaminants generated in the workplace possess varying "escape" velocities which, in turn, determine the "capture velocities" of fresh circulating air required to effectively remove the contaminant.
| Type of Contaminant: | Air Speed: |
| solvent, vapours, degreasing etc., evaporating from tank (in still air) | 0.25-0.5 m/s (50-100 f/min) |
| aerosols, fumes from pouring operations, intermittent container filling, low speed conveyer transfers, welding, spray drift, plating acid fumes, pickling (released at low velocity into zone of active generation) | 0.5-1 m/s (100-200 f/min.) |
| direct spray, spray painting in shallow booths, drum filling, conveyer loading, crusher dusts, gas discharge (active generation into zone of rapid air motion) | 1-2.5 m/s (200-500 f/min) |
| grinding, abrasive blasting, tumbling, high speed wheel generated dusts (released at high initial velocity into zone of very high rapid air motion). | 2.5-10 m/s (500-2000 f/min.) |
| Lower end of the range | Upper end of the range |
| 1: Room air currents minimal or favourable to capture | 1: Disturbing room air currents |
| 2: Contaminants of low toxicity or of nuisance value only | 2: Contaminants of high toxicity |
| 3: Intermittent, low production. | 3: High production, heavy use |
| 4: Large hood or large air mass in motion | 4: Small hood - local control only |
Viscous deep yellow flammable liquid coating; does not mix with water. Strong solvent smell.
Liquid.
Does not mix with water.
Floats on water.
| Molecular Weight: Not applicable. | Boiling Range (�C): 140 white spirit |
| Melting Range (�C): Not applicable. | Specific Gravity (water=1): 0.98 |
| Solubility in water (g/L): Insoluble | pH (as supplied): Not applicable |
| pH (1% solution): Not applicable. | Vapour Pressure (kPa): Not available. |
| Volatile Component (%vol): 40 | Evaporation Rate: Slow |
| Relative Vapour Density (air=1): >1 | Flash Point (�C): 31 |
| Lower Explosive Limit (%): Not available. | Upper Explosive Limit (%): Not available. |
| Autoignition Temp (�C): Not available. | Decomposition Temp (�C): Not available |
| State: Liquid |
· Presence of incompatible materials.
· Product is considered stable.
· Hazardous polymerisation will not occur.
Considered an unlikely route of entry in commercial/industrial environments. The liquid may produce gastrointestinal discomfort and may be harmful if swallowed. Ingestion may result in nausea, pain and vomiting. Vomit entering the lungs by aspiration may cause potentially lethal chemical pneumonitis.
The liquid may produce eye discomfort and is capable of causing temporary impairment of vision and/or transient eye inflammation, ulceration. The vapour is discomforting to the eyes.
The liquid is discomforting to the skin and is capable of causing skin reactions which may lead to dermatitis. Toxic effects may result from skin absorption.
The vapour is discomforting to the upper respiratory tract and may be harmful if inhaled. Inhalation hazard is increased at higher temperatures. Acute effects from inhalation of high vapour concentrations may be chest and nasal irritation with coughing, sneezing, headache and even nausea. If exposure to highly concentrated solvent atmosphere is prolonged this may lead to narcosis, unconsciousness, even coma and possible death.
Primary route of exposure is usually by skin contact/absorption. Prolonged or continuous skin contact with the liquid may cause defatting with drying, cracking, irritation and dermatitis following. Chronic solvent inhalation exposures may result in nervous system impairment and liver and blood changes. [PATTYS].
Not available. Refer to individual constituents. ALKYD RESIN SOLUTION: "alkyd resin" describes a generic insoluble polymer which has no residual hazardous reactants and is not absorbed in the gastro-intestinal tract. No acute or chronic human exposure / toxicity data available. Almost always in solvent solution - the hazard is from the solvent. TITANIUM DIOXIDE: TOXICITY IRRITATION Skin (human): 0.3 mg/3d- I Mild The material may produce moderate eye irritation leading to inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis. The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin. MINERAL TURPENTINE: Not available. Refer to individual constituents. WHITE SPIRIT: TOXICITY IRRITATION Inhalation (human) TCLo: 600 mg/m³/8h Nil Reported Oral (rat) LD50: >5000 mg/kg Eye (human): 470 ppm/15m Inhalation (rat) LC50: >5500 mg/m³/4h Eye (rabbit): 500 mg/24h Moderate white spirit, as CAS RN 8052-41-3
MATERIAL CARCINOGEN REPROTOXIN SENSITISER SKIN
________________________ ____________________ ________________ ________________ ________________
titanium dioxide IARC:2B
CARCINOGEN
IARC: International Agency for Research on Cancer (IARC) Carcinogens: titanium dioxide
Category: 2B
Marine Pollutant:Not Determined
No data for Solver 4159 Brite Glo Enamel Mid Chrome Lead Free. Refer to data for ingredients, which follows: TITANIUM DIOXIDE: DO NOT discharge into sewer or waterways. MINERAL TURPENTINE: DO NOT discharge into sewer or waterways.
· Consult manufacturer for recycling options and recycle where possible .
· Consult State Land Waste Management Authority for disposal.
· Incinerate residue at an approved site.
· Recycle containers if possible, or dispose of in an authorised landfill.
Labels Required: FLAMMABLE LIQUID HAZCHEM: 3[Y] UNDG:
| Dangerous Goods Class: | 3 | Subrisk: | None |
| UN Number: | 1263 | Packing Group: | III |
| ICAO/IATA Class: | 3 | ICAO/IATA Subrisk: | None |
| UN/ID Number: | 1263 | Packing Group: | III |
| ERG Code: | 3L |
| IMDG Class: | 3 | IMDG Subrisk: | None |
| UN Number: | 1263 | Packing Group: | III |
| EMS Number: | F-E,S-E | Marine Pollutant: | Not Determined |
alkyd resin solution (CAS No:Various): No regulations applicable titanium dioxide (CAS: 13463-67-7) is found on the following regulatory lists; Australia - Australia New Zealand Food Standards Code - Food Additives - Schedule 3 Colours permitted in accordance with GMP in processed foods specified in Schedule 1 Australia Exposure Standards Australia High Volume Industrial Chemical List (HVICL) Australia Inventory of Chemical Substances (AICS) Australia Therapeutic Goods Administration (TGA) Sunscreening agents permitted as active ingredients in listed products CODEX General Standard for Food Additives (GSFA) - Additives Permitted for Use in Food in General, Unless Otherwise Specified, in Accordance with GMP International Agency for Research on Cancer (IARC) Carcinogens OECD Representative List of High Production Volume (HPV) Chemicals white spirit (CAS: 8052-41-3) is found on the following regulatory lists; Australia Exposure Standards Australia Inventory of Chemical Substances (AICS) Australia Poisons Schedule International Council of Chemical Associations (ICCA) - High Production Volume List OECD Representative List of High Production Volume (HPV) Chemicals white spirit (CAS: 8042-47-5) is found on the following regulatory lists; Australia - Australia New Zealand Food Standards Code - Processing Aids - Generally permitted Australia Exposure Standards Australia High Volume Industrial Chemical List (HVICL) Australia Inventory of Chemical Substances (AICS) OECD Representative List of High Production Volume (HPV) Chemicals No data available for alkyd resin solution as CAS: Various. No data available for mineral turpentine as CAS: Not avail.
| Ingredient Name | CAS |
| white spirit | 8052-41-3, 8042-47-5 |
"Worst Case" computer-aided prediction of vapour components/concentrations:
Composite Exposure Standard for Mixture (TWA) (mg/m3): 480 mg/m³
If the breathing zone concentration of ANY of the components listed below is exceeded,
"Worst Case" considerations deem the individual to be overexposed.
Component Breathing Zone ppm Breathing Zone mg/m3 Mixture Conc: (%).
Component Breathing zone Breathing Zone Mixture Conc
(ppm) (mg/m³) (%)
mineral turpentine 80.00 480.0000 10.0
Operations which produce a spray/mist or fume/dust, introduce particulates to the
breathing zone.
If the breathing zone concentration of ANY of the components listed below is exceeded,
"Worst Case" considerations deem the individual to be overexposed.
At the "Composite Exposure Standard for Mixture" (TWA) (mg/m3): 10 mg/m³
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or
criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permission
from CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: 5-Aug-2005
Print Date: 16-Mar-2007