SOLVER 4572 MAXIWASH ACRYLIC SEMI GLOSS BLUE BASE
Chemwatch Independent Material Safety Data Sheet
Issue Date: 26-Jan-2006
C9317EC
CHEMWATCH 5013-06
Version No:3
SOLVER 4572 MAXIWASH ACRYLIC SEMI GLOSS BLUE BASE
"Acrylic water paint semigloss tint base misspelling as Maxi Wash"
Tint base for semi gloss washable water reducible interior house paint.
Applied by brush, hand roller or airless spray atomisation.
Company: Solver Paints Pty Ltd Address: 560 Churchill Road Kilburn SA, 5084 Australia Telephone: +61 8 8368 1200 Emergency Tel: 1800 039 008 (24 hours) Emergency Tel: +61 3 9573 3112 Fax: +61 8 8368 1222
NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to NOHSC Criteria, and ADG Code.
None
•None under normal operating conditions.
Safety Codes Safety Phrases S23 ■ Do not breathe gas/fumes/vapour/spray. S24 ■ Avoid contact with skin. S39 ■ Wear eye/face protection. S26 ■ In case of contact with eyes rinse with plenty of water and contact Doctor or Poisons Information Centre.
| NAME | CAS RN | % |
| acrylic polymer emulsion | 30-60 | |
| residual monomer | trace | |
| pigment | 1-9 | |
| filler | 5-15 | |
| preservative | <0.2 | |
| additives | 10-30 | |
| water | 7732-18-5 | 1-9 |
| NOTE: Manufacturer has supplied full ingredient | ||
| information to allow CHEMWATCH assessment. |
· Immediately give a glass of water.
· First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
■ If this product comes in contact with the eyes:
· Wash out immediately with fresh running water.
· Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids.
· Seek medical attention without delay; if pain persists or recurs seek medical attention.
· Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
■ If skin contact occurs:
· Immediately remove all contaminated clothing, including footwear.
· Flush skin and hair with running water (and soap if available).
· Seek medical attention in event of irritation.
· If fumes or combustion products are inhaled remove from contaminated area.
· Other measures are usually unnecessary.
■ Treat symptomatically.
· There is no restriction on the type of extinguisher which may be used. · Use extinguishing media suitable for surrounding area.
· Alert Fire Brigade and tell them location and nature of hazard. · Wear breathing apparatus plus protective gloves for fire only. · Prevent, by any means available, spillage from entering drains or water courses. · Use fire fighting procedures suitable for surrounding area.
· Non combustible. · Not considered a significant fire risk, however containers may burn. May emit poisonous fumes.
■ None known.
None
| Glasses: | Gloves: |
| Chemical goggles. | PVC chemical resistant type. |
· Clean up all spills immediately. · Avoid breathing vapours and contact with skin and eyes. · Control personal contact by using protective equipment. · Contain and absorb spill with sand, earth, inert material or vermiculite.
■ Moderate hazard. · Clear area of personnel and move upwind. · Alert Fire Brigade and tell them location and nature of hazard. · Wear breathing apparatus plus protective gloves. · Prevent, by any means available, spillage from entering drains or water course.
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
· Avoid all personal contact, including inhalation.
· Wear protective clothing when risk of exposure occurs.
· Use in a well-ventilated area.
· Avoid contact with moisture.
· DO NOT allow clothing wet with material to stay in contact with skin.
· Polyethylene or polypropylene container.
· Packing as recommended by manufacturer.
· Check all containers are clearly labelled and free from leaks.
■ None known.
· Store in original containers.
· Keep containers securely sealed.
· Store in a cool, dry, well-ventilated area.
· Store away from incompatible materials and foodstuff containers.
| • water: | CAS:7732-18-5 |
· Safety glasses with side shields. · Chemical goggles. · Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lens or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first- aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at the first signs of eye redness or irritation - lens should be removed in a clean environment only after workers have washed hands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59].
· Wear chemical protective gloves, eg. PVC. · Wear safety footwear or safety gumboots, eg. Rubber.
· Overalls. · P.V.C. apron. · Barrier cream. · Skin cleansing cream. The local concentration of material, quantity and conditions of use determine the type of personal protective equipment required. For further information consult site specific CHEMWATCH data (if available), or your Occupational Health and Safety Advisor.
■ General exhaust is adequate under normal operating conditions. Local exhaust ventilation may be required in specific circumstances.
Blue liquid paint; mixes with water. Mild acrylic paint odour.
Liquid.
Mixes with water.
| State | Liquid | Molecular Weight | Not applicable |
| Melting Range (ºC) | Not available. | Viscosity | Not available |
| Boiling Range (ºC) | 100 water. | Solubility in water (g/L) | Miscible |
| Flash Point (ºC) | Non Flammable | pH (1% solution) | Not available |
| Decomposition Temp (ºC) | Not available. | pH (as supplied) | 9 - 10 |
| Autoignition Temp (ºC) | Not applicable | Vapour Pressure (kPa) | Not available. |
| Upper Explosive Limit (%) | Not applicable | Specific Gravity (water=1) | 1.096 |
| Lower Explosive Limit (%) | Not applicable | Relative Vapour Density (air=1) | Not available. |
| Volatile Component (%vol) | 60 approx. | Evaporation Rate | Slow |
· Presence of incompatible materials.
· Product is considered stable.
· Hazardous polymerisation will not occur.
For incompatible materials - refer to Section 7 - Handling and Storage.
| ACUTE HEALTH EFFECTS | CHRONIC HEALTH EFFECTS |
| ■ Not applicable. | ■ Not applicable. |
■ Not available. Refer to individual constituents. WATER: ■ No significant acute toxicological data identified in literature search.
No data
| Ingredient | Persistence: Water/Soil | Persistence: Air | Bioaccumulation | Mobility |
| water | LOW | LOW | HIGH |
· Recycle wherever possible.
· Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitable treatment or disposal facility can be identified.
· Dispose of by: burial in a land-fill specifically licenced to accept chemical and / or pharmaceutical wastes or incineration in a licenced apparatus (after admixture with suitable combustible material).
· Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.
None (ADG7) NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS: ADG7, UN, IATA, IMDG
None
Regulations for ingredients
"Australia Inventory of Chemical Substances (AICS)","IMO IBC Code Chapter 18: List of products to which the Code does not apply","OECD Representative List of High Production Volume (HPV) Chemicals"
■ Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch Classification committee using available literature references.
A list of reference resources used to assist the committee may be found at:
www.chemwatch.net/references.
■ The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other settings.
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or
criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written
permission from CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: 26-Jan-2006
Print Date: 24-Aug-2010
This is the end of the MSDS.